Lack Drawers 3D Printer Model
The file 'Lack Drawers 3D Printer Model' is (stl,f3d) file type, size is 5.8MB.
The file 'Lack Drawers 3D Printer Model' is (stl,f3d) file type, size is 5.8MB.
Once upon a time i found some IKEA-Lack Drawers on thingiverse. But there was only a picture and one drawer. Everything else was gone. So i decided to make my own.
This is what i have done and it was frustrating.
So this is not fully useable!!This cost a lot of filament, time and nerves and strength. So i stopped eventually. Maybe someone else can use this to create something better.
The parts were sized to fit my Printer: 21x21x25 mm (actually i think i used 20x21x24)
Screwing the parts to the Table was hell as well, because there was barely any space to use a screwdriver and i needed a lot of force to screw them in.
Hint: Screw in the left and right side at first. Hold everything else in place to see how it fits best.
| Groß_Mitte.stl | 677.3KB | |
| Handle.stl | 187.3KB | |
| Lack_Schubladen_v2.f3d | 5.5MB | |
| Links_Kante.stl | 481.9KB | |
| Mitte_3er.stl | 780.6KB | |
| Plate_Holder_Bottom.stl | 27.5KB | |
| Rechts_3er.stl | 683.1KB | |
| Rechts_Kante.stl | 455.2KB | |
| Schublade_Groß.stl | 12.8KB | |
| Schublade_HochSchmal.stl | 12.4KB | |
| Schublade_KleinMitte.stl | 12.4KB | |
| Schublade_KleinOben.stl | 12.4KB | |
| Schublade_KleinObenSchmal.stl | 12.4KB | |
| Schublade_KleinUnten.stl | 12.4KB | |
| Sign_Other.stl | 187.1KB | |
| Sign_PETG.stl | 40.5KB | |
| Sign_PLA.stl | 21.4KB | |
| Sign_Spare_Parts.stl | 160.8KB | |
| Sign_Tools.stl | 77.1KB | |
| Support_3_drawers.stl | 29.0KB | |
| Support_3_Drwawers_with_Plates.stl | 35.4KB | |
| Support_3_Drwawers_with_Plates_mirrored.stl | 35.4KB | |
| Support_Big_1_Drawer.stl | 10.0KB | |
| Support_Small_1_Drawer.stl | 15.1KB |
