stand for 6/8/10mm rod with 3 sizes of Retort Rings (40/50/65mm diameter)
For each ring I made a version that also connects to the wall.
Ingredients:
| 10_mm_stend_v2.stl | 53.7KB | |
| 6mm_stend_v2.stl | 60.1KB | |
| 8mm_stend_v2.stl | 57.9KB | |
| lock.stl | 365.7KB | |
| open_ring_holder_D40mm__Rod10mm.stl | 128.1KB | |
| open_ring_holder_D40mm__Rod6mm.stl | 126.1KB | |
| open_ring_holder_D40mm__Rod8mm.stl | 127.7KB | |
| PH_paper_holder.stl | 20.6KB | |
| ring_holder_D50mm__Rod10mm.stl | 101.8KB | |
| ring_holder_D50mm__Rod6mm.stl | 100.9KB | |
| ring_holder_D50mm__Rod8mm.stl | 101.5KB | |
| ring_holder_D65mm__Rod10mm.stl | 111.6KB | |
| ring_holder_D65mm__Rod6mm.stl | 110.2KB | |
| ring_holder_D65mm__Rod8mm.stl | 111.0KB | |
| Wall_ring_holder_D65mm.stl | 128.3KB | |
| Wall_ring_holder_Diameter40mm.stl | 157.9KB | |
| Wall_ring_holder_Diameter50mm.stl | 133.4KB |
