L115A3 45° Forward Picatinny Rail (For Airsoftt) 3D Printer Model
The file 'L115A3 45° Forward Picatinny Rail (For Airsoftt) 3D Printer Model' is (stl,txt) file type, size is 34.2KB.
The file 'L115A3 45° Forward Picatinny Rail (For Airsoftt) 3D Printer Model' is (stl,txt) file type, size is 34.2KB.
For this to work and be put together you will need this stuff
THIS IS MAINLY FOR LOOKS AND MIGHT NOT FUNCTION WITH NIGHT VISION ADD ONS
Heres the links but if you have the stuff then here you go :)
4x M4x20mm Bolts to hold the rail on and the locking screw for the metal plug
https://amzn.eu/d/3GRWkOv
3x M4x8MM blots for the side that dose not have the rail on
https://amzn.eu/d/3GRWkOv
6x M4 Knurled Insert Nuts ( I recommend the ones with the flat bits then the Knurling.
https://amzn.eu/d/3tEwVZx
Metal connector (I decided not to print the block mount with the rod as it would brake off to easily)
https://amzn.eu/d/bDwVLL0
Please feel free to modify and upload remixes all I ask is you don't charge anyone for this!!!!! (I will find you if you do:)
as for the texture of the block and rail, im using cura and fuzzy skin for the fuzzy skin setting you want
fuzzy skin thickness 0.2mm
fuzzy skin density 1.25mm
fuzzy skin point distance 0.1mm
infill I recommend anything higher then 60 just for the Insert Nuts to grab onto
resolution standard anything smaller and the fuzzy skin comes out looking weird, bit of black paint and you're sorted
im using zero's PETG Filament as it just works for me (https://amzn.eu/d/4FxJexT)
One last thing MAKE SURE THE AROW AT THE BOTTOM IS FASKING THE GUN OR THE PIN WONT LOCK IN!!!
| block_mount.stl | 84.8KB | |
| NV_Mount.stl | 75.1KB | |
| ReadMePlease.txt | 1.3KB |
