My next Lⅇgo creation, the door from Fallout 4 vault 111. The frame has holes so you can lock the door with a rod or similar. There are 4 versions of the door included:
One without any holes or bricks.
One with mounting holes.
One with mounting holes and a "male" brick on the back.
One with mounting holes and a "female" brick on the back.
With the last two versions you can add a custom opening mechanism to your Lⅇgo VAULT!
IMPORTANT: Print the door at 98% or a bit less, else you will have to do a lot of sanding!!
Find all models of the project here:
https://www.thingiverse.com/KnowMej/collections/project-lego-vault-fallout
UPDATE
Due to popular demand I added a rail to let the door slide over. I didn´t test it yet.
| Door_without_mounting_holes.stl | 2.8MB | |
| Door_with_4by4_brick_on_the_back.stl | 5.1MB | |
| Door_with_4by4_HOLE_on_the_back.stl | 5.0MB | |
| Door_with_mounting_holes.stl | 2.9MB | |
| Frame.stl | 275.8KB | |
| rail_left.stl | 115.9KB | |
| rail_right.stl | 117.3KB |
