Front hub carrier with -5 degree caster angle for the Kyosho Triumph (TMW-1).
These are designed to lean the front spindles forward to reduce the front caster angle. In general, this will increase steering response. In particular, this can be felt mid-to-late turn and provide a more aggressive steering response.
Ream the arm hinge pin hole with a 3 mm drill bit. Ream the spindle hinge pin with a 4 mm drill bit. Tap the turnbuckle mount with a M3 tap.
NOTE: I also have 0 degree and -10 degree variant modeled and will eventually post. I have the -10 degree version currently equipped on my buggy which does create some interesting driving dynamics (goes from understeer to oversteer depending on position in the turn).
| TRIUMPH_CASTER_BLOCK_LH5N.stl | 153.8KB | |
| TRIUMPH_CASTER_BLOCK_LH5N.stp | 116.3KB | |
| TRIUMPH_CASTER_BLOCK_RH5N.stl | 153.7KB | |
| TRIUMPH_CASTER_BLOCK_RH5N.stp | 116.3KB |
