Kyosho Legendary Series Shocks Gasket Helper 3D Printer Model
The file 'Kyosho Legendary Series Shocks Gasket Helper 3D Printer Model' is (stl) file type, size is 28.3KB.
The file 'Kyosho Legendary Series Shocks Gasket Helper 3D Printer Model' is (stl) file type, size is 28.3KB.
I built a few Kyosho legendary series kit, and one step is always difficult. Last time, I did not thought about this, but it's always hard to put the shock gaskets in place, and sometimes you break one.
This is my own attempt to solve the problem. This is small part designed to push the gasket in place.
There is two stl in this publication:
The way it works : position the gasket in the printed part, and simply push the shock part in...
Takes few minutes to print, no supports required and PLA is fine for this. Push it a few times in the shock part without gasket to make sure it is fine before trying with the gasket as this is designed to be a tight fit.
| SBT-ShocksGasketHelper.stl | 91.7KB | |
| TSco-Optimas-ShocksGasketHelper.stl | 80.2KB |
