Kyle Katarn’s First Lightsaber 3D Printer Model
The file 'Kyle Katarn’s First Lightsaber 3D Printer Model' is (stl) file type, size is 5.7MB.
The file 'Kyle Katarn’s First Lightsaber 3D Printer Model' is (stl) file type, size is 5.7MB.
Rewind a few years…maybe a little more than a few years. It's 1997 - Dark Forces II came out. Thanks to the popularity of the Dark Forces II the Kyle Katarn character was absorbed into the expanded universe. This was his first lightsaber - created by Jedi Master Qu Rahn; and passed down to Kyle by his father, Morgan.
I don't know why, but I loved this lightsaber and it is still my favorite design to this day. I remember building it out of drain tubes, aluminum, washers and PVC pipes back in the day. So 27 years later, I figured I would build it again on a 3D printer. The dimensions came from a schematic I found online and a handful of pics I found.
Like most of my designs, this model does not require any supports, brims, or glue (because I hate glue!)
You can go to my Printables page to download the STLs and intructions: https://www.printables.com/model/771443-kyle-katarns-first-lightsaber
| KK_lightsaber.stl | 15.8MB |
