I really liked the original design, but needed to scale it up for Kyber 2.0's. I also made the cross pieces friction fit rather than just fit in place. Due to being taller, had to print in 2 pieces.
| 6_Kyber_Crystal_2.0_Rack_side_A.stl_A.stl | 524.8KB | |
| 6_Kyber_Crystal_2.0_Rack_side_A.stl_B.stl | 685.6KB | |
| 6_Kyber_Crystal_2.0_Rack_side_B.stl_A.stl | 332.7KB | |
| 6_Kyber_Crystal_2.0_Rack_side_B.stl_B.stl | 608.0KB | |
| Kyber_2.0_Rack_Cross_Piece_1.stl.stl | 340.7KB | |
| Kyber_2.0_Rack_Cross_Piece_2.stl.stl | 224.1KB | |
| Kyber_2.0_Rack_Cross_Piece_3.stl.stl | 514.4KB | |
| Kyber_2.0_Rack_Cross_Piece_4.stl.stl | 263.3KB | |
| Kyber_Crystal_2.0_Rack.3mf | 1010.2KB |
