The file 'Kuro’s Geared Bowden Extruder (mk7/mk8, 1.75/3mm, Instant Locker, Gear Cleaning Brush) 3D Printer Model' is (scad,stl) file type, size is 184.0KB.
Tips:
M5 washer can be printed - samples are in locker source code
If you have a tilt between M5 bolt and bearings and drive gear - just wrap bolt with stick tape, use caliper to get desired diameter
Main advantages:
instant locker for idler
hole with lock for gear brush and trash container
gear mk7/mk8 option
particular details show option
Tested on mk8 1.75
Code optimized
Added options:
filament gear size
filament size adjusted
motor distance
gear axis
prusa hook sizes
gear_screw_shift
support for prusa
holes for filament brush
| AJGW-FastRelease.scad | 2.7KB | |
| AJGW-FastRelease.stl | 421.7KB | |
| Geared_Extruder.scad | 11.8KB | |
| Geared_Extruder.stl | 652.5KB | |
| hardware.scad | 2.9KB | |
| idler.stl | 216.9KB | |
| involute_gears.scad | 18.2KB | |
| Kuros_stronger_gear.scad | 2.9KB | |
| Kuros_stronger_gear.stl | 768.9KB | |
| mk7.scad | 475.0B | |
| support.stl | 63.8KB |
