Kuiperium Insert 3D Printer Model Free Download

Description Files (6)

Summary

This is the first version of a basic insert for the 2 player board game Kuiperium. This insert requires the removal of the cardboard insert the game comes with and should fit sleeved cards (haven't sleeved them yet myself).
Unfortunately due to the form factor of the game, this insert requires a lot of infill to attempt to fill the box (I have intentionally left about 1cm at the top of the box to prevent lift and any possible expansions that may come out. This means it should be stored horizontally as there is some space for the components to move in the vertical (in other words, the cards and crystals will go everywhere if stored vertically

Print the followings:

1x Kuiperium Card Holder
1x Player Board Spacer (prevents other components shifting around and holds player boards in place
1x Reference Card Tray
1x Strategy Card Tray
2x Crystal Tray (have 2 of these to share crystals between players and utilize more of the box space)
2x Player Tray (holds both the 4 starting times and 4 wooden pieces each player starts the game with)

Update 16th June 2024:

I made a slight change to the Player Board Spacer to include a hold to allow for removal of the player boards a bit easier.

1X_Kuiperium_Card_Holder.stl	14.3KB
1X_Player_Board_Spacer.stl	7.5KB
1X_Reference_Cards_Tray.stl	5.7KB
1X_Strategy_Card_Tray.stl	13.9KB
2X_Crystal_Tray.stl	48.6KB
2X_Player_Tray.stl	3.0KB

Kuiperium Insert 3D Printer Model

Summary

Tags

You might also like