Kubic – An ITX PC Case That Looks Like A Cube 3D Printer Model
The file 'Kubic – An ITX PC Case That Looks Like A Cube 3D Printer Model' is (stl,step) file type, size is 7.6MB.
The file 'Kubic – An ITX PC Case That Looks Like A Cube 3D Printer Model' is (stl,step) file type, size is 7.6MB.
Introducing Kubic, an ITX PC Case designed for your SFF (Small Form Factor) build, that can take a pretty beefy system for intense gaming sessions and taking cues from the GameCube and the old Power Mac G4 Cube. (Mine also looks like a NES. Lovely isn't it ?)
You can use a discreet GPU up to 2 slots thick and 214 mm long, and up to four separate SATA drives for extra storage.
It is designed to be printed on a smaller printer such as the Prusa MINI or The Bambu A1. The largest pieces are the panels that are 170*170 mm.
The case uses a single 140 mm chassis fan for cooling, mounted on top. The idea is to take cool air from the bottom and drive it up to the top, collecting the heat of the whole system in the process. It gave great results in my tests, stabilizing at 70° C for the CPU and 75° C for the GPU in standard gaming conditions with a Noctua NH-L12S. Under an absolute worst case scenario (maxing the CPU AND the GPU for 2 hours) I'm stabilizing under 83° C for the CPU and 72° C for the GPU.
I made all of my prints in PLA with absolutely no problem, even thermal wise. PETG is a good solution if you're worried about durability.
And it has a handle, too !
Edit : Added 3 extra faceplates for the front panel to choose from (with or without front USB, with or without audio jack). Simply print the one that you like.
See my Instructables page for full build instructions (it's not that hard, really)
The case has been created on Onshape. Feel free to fork and edit the project should want to do this.
For the bottom part, there is 4 configurations available, depending on the thickness of your GPU : standard 2 slots thick, 2.5 slots thick (for cards like the Asus RX7600 DUAL OC V2), 3 slots and event 3.5 slots. Simply print the one you need (The file name is prefixed).
Note that I could only test fitment for the 2 and 2.5 slots configurations, and I'm not even sure there are thicker slots under 215 mm length. But they are here if needed. Feel free to send me feedback if you ever come to use them.
Finally, I added a blank panel in STEP format, that you can use to easily import into your CAD software and edit to create your own custom panels
| KUBIC_-_Back_Panel.stl | 728.7KB | |
| KUBIC_-_Blank_Panel.step | 18.2KB | |
| KUBIC_-_Bottom_Panel.stl | 1.2MB | |
| KUBIC_-_Frame_Front_BOTTOM_2.5_SLOTS.stl | 293.3KB | |
| KUBIC_-_Frame_Front_BOTTOM_2_SLOTS.stl | 292.7KB | |
| KUBIC_-_Frame_Front_BOTTOM_3.5_SLOTS.stl | 291.9KB | |
| KUBIC_-_Frame_Front_BOTTOM_3_SLOTS.stl | 293.1KB | |
| KUBIC_-_Frame_Front_TOP.stl | 291.5KB | |
| KUBIC_-_Frame_LEFT_BACK.stl | 328.4KB | |
| KUBIC_-_Frame_Left_BOTTOM_2.5_SLOTS.stl | 205.2KB | |
| KUBIC_-_Frame_Left_BOTTOM_2_SLOTS.stl | 205.4KB | |
| KUBIC_-_Frame_Left_BOTTOM_3.5_SLOTS.stl | 205.2KB | |
| KUBIC_-_Frame_Left_BOTTOM_3_SLOTS.stl | 205.4KB | |
| KUBIC_-_Frame_Left_FRONT.stl | 206.5KB | |
| KUBIC_-_Frame_Left_TOP.stl | 205.4KB | |
| KUBIC_-_Frame_Rear_BOTTOM_2.5_SLOTS.stl | 325.5KB | |
| KUBIC_-_Frame_Rear_BOTTOM_2_SLOTS.stl | 323.5KB | |
| KUBIC_-_Frame_Rear_BOTTOM_3.5_SLOTS.stl | 323.1KB | |
| KUBIC_-_Frame_Rear_BOTTOM_3_SLOTS.stl | 325.2KB | |
| KUBIC_-_Frame_Rear_TOP.stl | 294.3KB | |
| KUBIC_-_Frame_Right_BACK.stl | 235.0KB | |
| KUBIC_-_Frame_Right_BOTTOM_2.5_SLOTS.stl | 237.7KB | |
| KUBIC_-_Frame_Right_BOTTOM_2_SLOTS.stl | 237.7KB | |
| KUBIC_-_Frame_Right_BOTTOM_3.5_SLOTS.stl | 237.7KB | |
| KUBIC_-_Frame_Right_BOTTOM_3_SLOTS.stl | 237.7KB | |
| KUBIC_-_Frame_Right_FRONT.stl | 370.6KB | |
| KUBIC_-_Frame_Right_TOP.stl | 269.4KB | |
| KUBIC_-_Front_Panel.stl | 1.1MB | |
| KUBIC_-_Front_Panel_-_No_USB.stl | 1.1MB | |
| KUBIC_-_Front_Panel_-_No_USB_-_No_audio.stl | 1.1MB | |
| KUBIC_-_Front_Panel_-_USB_-_Audio_out.stl | 1.1MB | |
| KUBIC_-_Handle.stl | 2.6MB | |
| KUBIC_-_Handler_1.stl | 72.0KB | |
| KUBIC_-_Handler_2.stl | 72.0KB | |
| KUBIC_-_Left_Corner_BACK_BOTTOM_2.5_SLOTS.stl | 266.4KB | |
| KUBIC_-_Left_Corner_BACK_BOTTOM_2_SLOTS.stl | 265.9KB | |
| KUBIC_-_Left_Corner_BACK_BOTTOM_3.5_SLOTS.stl | 268.4KB | |
| KUBIC_-_Left_Corner_BACK_BOTTOM_3_SLOTS.stl | 266.6KB | |
| KUBIC_-_Left_Corner_BACK_TOP.stl | 219.1KB | |
| KUBIC_-_Left_Corner_FRONT_BOTTOM_2.5_SLOTS.stl | 267.1KB | |
| KUBIC_-_Left_Corner_FRONT_BOTTOM_2_SLOTS.stl | 266.7KB | |
| KUBIC_-_Left_Corner_FRONT_BOTTOM_3.5_SLOTS.stl | 268.0KB | |
| KUBIC_-_Left_Corner_FRONT_BOTTOM_3_SLOTS.stl | 266.9KB | |
| KUBIC_-_Left_Corner_FRONT_TOP.stl | 218.1KB | |
| KUBIC_-_Left_Panel.stl | 2.1MB | |
| KUBIC_-_Right_Corner_BACK_BOTTOM_2.5_SLOTS.stl | 266.6KB | |
| KUBIC_-_Right_Corner_BACK_BOTTOM_2_SLOTS.stl | 265.9KB | |
| KUBIC_-_Right_Corner_BACK_BOTTOM_3.5_SLOTS.stl | 268.1KB | |
| KUBIC_-_Right_Corner_BACK_BOTTOM_3_SLOTS.stl | 266.4KB | |
| KUBIC_-_Right_Corner_BACK_TOP.stl | 219.5KB | |
| KUBIC_-_Right_Corner_FRONT_BOTTOM_2.5_SLOTS.stl | 267.6KB | |
| KUBIC_-_Right_Corner_FRONT_BOTTOM_2_SLOTS.stl | 267.6KB | |
| KUBIC_-_Right_Corner_FRONT_BOTTOM_3.5_SLOTS.stl | 266.7KB | |
| KUBIC_-_Right_Corner_FRONT_BOTTOM_3_SLOTS.stl | 266.2KB | |
| KUBIC_-_Right_Corner_FRONT_TOP.stl | 218.0KB | |
| KUBIC_-_Right_Panel.stl | 6.2MB | |
| KUBIC_-_Top_Panel.stl | 761.5KB |
