How you can see on pictures, thing is to rear wheel, fits KTM DUKE 790 2020, measure if also other year, there is 32mm nut od right side.
you need 6mm threaded rod and washers and nuts. Keep rod a bit longer to have place to screw a insert.
It works great with my remix of chain cover, but is not necessary, you can use it separate. Link to chain cover: https://www.thingiverse.com/thing:6764864
If you would like to make any modification, I designet it in onshape, feel free to use it:
https://cad.onshape.com/documents/4741c93e33c4b46bf78c7f3c/w/223b4568b2b1021fa6db9102/e/dd08e850a50604e4bd05eec4
Need to print insert 2 times.
PS: in res 0.2 with infil 40 on speed 100 and tree supports was print time around 6-7 hours.
Print it KTM logo face up.
| INSERT_FINAL.stl | 85.9KB | |
| LEFT_FINAL.stl | 696.1KB | |
| RIGHT_FINAL.stl | 714.1KB |
