Kryptonite Spear Prop (Batman V Superman) 3D Printer Model
The file 'Kryptonite Spear Prop (Batman V Superman) 3D Printer Model' is (stl) file type, size is 11.9MB.
The file 'Kryptonite Spear Prop (Batman V Superman) 3D Printer Model' is (stl) file type, size is 11.9MB.
Watch here: https://youtu.be/hdj0a-Hn14Y
I've been working on this one for a few months now. And I was finally able to get it completed with the help of the CR10 allowing me to print really tall pieces.
This is a full size movie prop from the Batman V Superman DCEU movie. I tried to create it to match the size and proportions as in the movie.
After printing my wife sanding it, hit it with filler primer, then used spray paint to get the main color. Then she finished it off by using acrylic paints and a paintbrush to paint on the black areas.
Printer: Da Vinci Pro 1.0 & Creality CR-10
Filament: Hatchbox PLA
Layer Height: 0.3mm
Supports: Yes
| Kryptonite_after_zbrush.stl | 9.5MB | |
| Pin.stl | 684.0B | |
| Spear_A.stl | 79.5KB | |
| Spear_B.stl | 74.5KB | |
| Spear_C.stl | 166.4KB | |
| Spear_D.stl | 1.7MB | |
| Spear_E.stl | 105.4KB | |
| Spear_F.stl | 124.5KB | |
| Spear_G.stl | 46.2KB | |
| Spear_H.stl | 82.5KB | |
| Spear_I.stl | 42.3KB | |
| Spear_J.stl | 2.5MB | |
| Spear_K.stl | 878.9KB | |
| Spear_L.stl | 39.9KB | |
| Spear_M.stl | 1.1MB | |
| Spear_N.stl | 2.3MB | |
| Spear_O.stl | 103.6KB | |
| Spear_P.stl | 102.2KB | |
| Spear_Q.stl | 1.7MB | |
| Spear_R.stl | 48.3KB | |
| Spear_S.stl | 1.0MB | |
| Spear_T.stl | 2.9MB | |
| Spear_U.stl | 2.9MB |
