Kossel Mini – SmartLCD Controller Housing 3D Printer Model
The file 'Kossel Mini – SmartLCD Controller Housing 3D Printer Model' is (stl) file type, size is 873.9KB.
The file 'Kossel Mini – SmartLCD Controller Housing 3D Printer Model' is (stl) file type, size is 873.9KB.
This are my Ideas of housings for the well-known Smart-LCD Controller. It fits on a standard Kossel with a 3 x 15 mm frame-base.
The Versions V2.x are a little bit higher than the top-most beam on an Kossel-Mini. This is intended to be so. Design, you know? :-)
NOTE: I've noticed that there are significant tollerances concerning the placement of the buzzer on the SmartLCD board. On the two boards I'm currently working with, the buzzers are 4mm - 5mm off alignment. Therefore I made the hole for the buzzer a bit larger than the buzzer's actual diameter.
Oh - and don't forget the knob. ;-)
| LCD-Knopf.stl | 117.8KB | |
| SmartLCD_Housing_V1.1.stl | 427.3KB | |
| SmartLCD_Housing_V1.2.stl | 380.0KB | |
| SmartLCD_Housing_V2.1.stl | 725.3KB | |
| SmartLCD_Housing_V2.2.stl | 692.2KB |
![[Home Assistant] Alarm Box With Push Button + Buzzer + Door Sensor ESP8266 (updated + Configuration) 3D Printer Model](https://cdn.3axis.co/assets/aa/83/d9/58/aa83d958-a9e4-43c2-83e3-4f2b5a4497f3/images/35f903ac-2a40-4b72-9004-62506046f3f8_thumb.jpg)
