The file 'Kossel Mini Effector Assembly With The Hotend (e3dv6) Nozzle Acting As A Probe And More Or Less Circular Cooling Duct 3D Printer Model' is (stl) file type, size is 321.3KB.
It's not overly original design, I have marked it as a derivative of many designs I have seen, none of them was exactly what I wanted. Technically, I had to design everything from scratch, as none of the designs were done in the CAD I could possibly use (which is nearly none, because I seem to be unable to handle mouse-driven software).
So I integrated all the ideas I've seen to end up with the effector that has a probe, uses hotend nozzle for this purpose, actually fits e3dv6 hotend and has a cooling duct that I like. Most parts are printed in PLA, fanduct in PETG (in reality I also printed some fan holder links in PETG, because at some point I had to print them without cooling and PLA doesn't take that lightly).
To build the thing you will need a 50x15 blower fan, a microswitch, a bunch of M3 screws and nuts of I don't remember what lengths and a couple of smaller screws (2mm?) for microswitch.
This is bed leveling in action: https://youtu.be/Ywp_qdY8-IA
| airduct.stl | 1.2MB | |
| effector-platform.stl | 231.7KB | |
| effector-platform_repaired.stl | 290.9KB | |
| fan-holder-arm.stl | 27.1KB | |
| fan-holder.stl | 163.8KB | |
| fanholder-link.stl | 133.7KB | |
| hotend-holder-clamp.stl | 62.7KB | |
| hotend-holder-clamp_repaired.stl | 79.0KB | |
| hotend-holder.stl | 56.4KB | |
| hotend-holder_repaired.stl | 72.5KB |
