Kossel Alt – 20mm Extrusion – 8mm Smooth Rods 3D Printer Model
The file 'Kossel Alt – 20mm Extrusion – 8mm Smooth Rods 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Kossel Alt – 20mm Extrusion – 8mm Smooth Rods 3D Printer Model' is (stl) file type, size is 1.2MB.
I've been using my Prusa Air printer since over a year now and I have decided to try delta type printer. Kossel is a really great design but as I had some 8mm smooth rods and 20mm extrusion laying around I wanted to use them instead of precision rails.. I've found Zam's Kossel files but after printing them out I've noticed that belts are not aligned with the carriages. I had some older stepper motors probably from an old printer(?) with gt2 pulleys pressed on the shafts and I couldn't remove them.., anyway I thought that it would be better to have belts running exactly between the smooth rods.. So instead redesigning carriage I have redesigned frame.. Carriage was taken from here http://www.thingiverse.com/thing:30611
Dry test http://youtu.be/RXFzkHzH564
Enjoy!
UPDATE: 01/02/2014
As it was noticed by Senormeow http://www.ohmpie.com/delta_printer/, the 8mm rods are not sturdy enough for this height. I will be uploading stl files for 10mm rods version soon which should help to make it more rigid. If you decide to use 8mm rods anyway then I would advice to use shorter extrusion lengths for the columns or lower top frame by 10-20cm. Bear in mind it's still work in progress ;), thanks
| Kossel_Rav_Alt_20x20x8_rubber_feet_support.stl | 35.2KB | |
| Kossel_Rav_Alt_bottom_frame_2040.stl | 629.9KB | |
| Kossel_Rav_Alt_bottom_frame_2040mm_V3.stl | 786.2KB | |
| Kossel_Rav_Alt_bottom_frame_20mm.stl | 305.5KB | |
| Kossel_Rav_Alt_bottom_frame_20mm_v2.stl | 459.0KB | |
| Kossel_Rav_Alt_bottom_frame_20mm_V3.stl | 517.0KB | |
| Kossel_Rav_Alt_bottom_frame_25mm_extrusion.stl | 412.4KB | |
| Kossel_Rav_Alt_bottom_support.stl | 122.4KB | |
| Kossel_Rav_Alt_bottom_upper_support.stl | 311.4KB | |
| Kossel_Rav_Alt_DTI_pen_holder_8mm.stl | 184.2KB | |
| Kossel_Rav_Alt_endstop_holder_makerbot.stl | 347.4KB | |
| Kossel_Rav_Alt_endstop_holder_v2.stl | 342.8KB | |
| Kossel_Rav_Alt_extrusion_core_pin.stl | 63.9KB | |
| Kossel_Rav_Alt_heatbed_MK2a_support_bottom_right.stl | 333.2KB | |
| Kossel_Rav_Alt_heatbed_MK2a_support_left_bottom.stl | 334.6KB | |
| Kossel_Rav_Alt_heatbed_MK2a_support_topprint_x2_for_left_and_right_side.stl | 62.8KB | |
| Kossel_Rav_Alt_j-head_bowden_adapter.stl | 207.9KB | |
| Kossel_Rav_Alt_j-head_groove_mount.stl | 208.0KB | |
| Kossel_Rav_Alt_LED_hinged_plate_left.stl | 31.6KB | |
| Kossel_Rav_Alt_LED_hinged_plate_right.stl | 36.0KB | |
| Kossel_Rav_Alt_LED_strip_hinge.stl | 61.9KB | |
| Kossel_Rav_Alt_platform_traxx_ball_joints.stl | 1.0MB | |
| Kossel_Rav_Alt_top_frame_20mm.stl | 255.2KB | |
| Kossel_Rav_Alt_top_frame_20mm_608_8mm.stl | 400.4KB | |
| Kossel_Rav_Alt_top_frame_20mm_v2.stl | 304.3KB | |
| Kossel_Rav_Alt_top_frame_25mm_extrusion.stl | 294.3KB | |
| Kossel_Rav_Alt_top_frame_optional_support.stl | 608.4KB | |
| Kossel_Rav_Alt_top_frame_v3.stl | 403.1KB | |
| Kossel_Rav_jhead_groove_mount_fixed_mesh.stl | 160.4KB | |
| Kossel_Rav_platform_mesh_fixed.stl | 1004.1KB | |
| Wades_bowden_adapter_v3.stl | 135.6KB |
