Koozie – Simple Sleeve 3D Printer Model
The file 'Koozie – Simple Sleeve 3D Printer Model' is (STL) file type, size is 1.6MB.
The file 'Koozie – Simple Sleeve 3D Printer Model' is (STL) file type, size is 1.6MB.
Went on a koozie binge and this was the first of the few. It features 4 finger grooves around it, a snug fit to Pepsi cans and Coke cans (I imagine others too!), and a hole in the bottom.
I printed mine with PLA and used a 1mm wall thickness, with 4% gyroid infill to have the most air on the inside for insulation. The bottom layer count was increased to be 6mm thick of solid filament to give it extreme stability.
Not much else to say about it, it's a koozie to keep your drinks colder for longer and to maybe strike up a conversation about 3D printing while doing it.
It is a single model, single file, and an easy print to perform. Functional right off the print bed!
If you're curious about the performance of the koozie compared to ‘Off The Shelf’ Koozies, check out the video below where I actually compare them:
If you like what you see on YouTube please like and subscribe! Check out the other 3D printing videos I have as well as the other models on Thingiverse!
Follow the Twitter Stream to find out what's next!
https://twitter.com/SanfordPrime
Thanks for checking it out, let me know in the comments how it prints and works for you!
| Simple_Koozie.STL | 4.8MB |
