"Koopa Troopas (often shortened to Koopas, shortened to Troopas in The Super Mario Bros. Super Show!, sometimes called Turtles) are turtle-like creatures with removable shells that come in many different colors, with red and green Koopa Troopas being the most common" - from https://www.mariowiki.com/Koopa_Troopa
This is a multi-color print. Print each part in the right color and glue then afterward.
The version posted is 12 cm height. You can scale it up, but I don´t recommend scaling it down due to some small pieces.
You can print this model completely support free, but there are options. The head can be printed as three pieces, without supports (“head_split_top”, “head_split_bottom” and “head_split_connector”), or as one single piece, with supports (“head_full”). The single piece head has a more accurate nose tip. I prefer this option.
The eyes pieces (especially the little white dot) are quite small. I recommend you to print it using rafts.
The stand is optional.
Let me know if you have any questions.
Enjoy!
| koopa-arm_left.stl | 696.2KB | |
| koopa-arm_right.stl | 771.5KB | |
| koopa-body_back_connector_x_2.stl | 1.1KB | |
| koopa-body_split_bottom.stl | 703.7KB | |
| koopa-body_split_connector.stl | 684.0B | |
| koopa-body_split_top.stl | 962.8KB | |
| koopa-eye_external.stl | 128.0KB | |
| koopa-eye_left_black.stl | 49.2KB | |
| koopa-eye_left_blue.stl | 71.8KB | |
| koopa-eye_left_white.stl | 15.6KB | |
| koopa-eye_right_black.stl | 49.2KB | |
| koopa-eye_right_blue.stl | 70.0KB | |
| koopa-eye_right_white.stl | 15.6KB | |
| koopa-head_full.stl | 1.7MB | |
| koopa-head_split_bottom.stl | 173.2KB | |
| koopa-head_split_connector.stl | 1.4KB | |
| koopa-head_split_top.stl | 1.6MB | |
| koopa-leg_left.stl | 339.6KB | |
| koopa-leg_right.stl | 354.5KB | |
| koopa-shell_back.stl | 1.0MB | |
| koopa-shell_border_back.stl | 462.8KB | |
| koopa-shell_border_front.stl | 485.9KB | |
| koopa-shoe_left.stl | 1.0MB | |
| koopa-shoe_left_sole.stl | 293.0KB | |
| koopa-shoe_right.stl | 1.0MB | |
| koopa-shoe_right_sole.stl | 290.2KB | |
| koopa-stand.stl | 220.2KB | |
| koopa-tail.stl | 90.6KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
