Kodak Aero Ektar Filter Holder Substrate 3D Printer Model
The file 'Kodak Aero Ektar Filter Holder Substrate 3D Printer Model' is (stl) file type, size is 134.1KB.
The file 'Kodak Aero Ektar Filter Holder Substrate 3D Printer Model' is (stl) file type, size is 134.1KB.
This is a substrate with which you can make a filter adapter for 77mm filters to be used with the Kodak Aero-Ektar 7in (178mm) F2.5 lens.
This is an update to a design I made years ago. Now I have a proper M82 x 0.75 female thread at the center, so all you need to do is to purchase an 82-to-77 step-down adapter on Amazon, etc., carefully screw it into the center, and you are ready to go. It's probably good to use a material that is not prone to shrinkage, because shrinkage will cause the female thread to not work. I use PLA.
If you do not have a 3D printer and would like to purchase a fully assembled filter adapter, contact me ;)
| AE_Filter_Holder_v9.stl | 363.2KB |
