Kobra Neo Dual Fan With Endoscope 3D Printer Model
The file 'Kobra Neo Dual Fan With Endoscope 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Kobra Neo Dual Fan With Endoscope 3D Printer Model' is (stl) file type, size is 2.7MB.
Print flat side down, the design was meant to melt a hex nut into it. It may work better with higher temperature-rated materials like PETG, however, it works great with PLA.
You may need Support Blocker in your slicer to stop the supports from reaching inside the vents and only the outside but its a quick and easy download.
Because Fusion 360 sucks you have to glue the two parts together. Superglue works well.
The right side of the vents will be blockers by the nozzle cam tube, airflow still exeptional.
Hardware; screws and nuts
qty 2) m4x25mm long
qty 1) mxx6mm long
Original design:https://www.printables.com/en/model/509851-anycubic-kobra-neo-dual-5015-fans
Printed on the Anycubic Kobra Neo, with 20% infill, Brim, and PLA.
| Dual5015KobraNeo.stl | 2.9MB | |
| Dual_Fan_Assembly_V2.stl | 652.9KB | |
| Endoscope_V8.stl | 3.2MB |
