This is a design I made for my Kobra2 from Anycubic to use the light off amazon I got from BOX3D, I liked the light but needed a good way to mount it out of the way and get the wire to the base safely. You will need 6 zip ties which hold the top mount on. The hardware and nuts from the light kit are used to attach the lower tower to the base.
| 00_Upper_wire_stack.STL | 159.3KB | |
| 03_Light_Holder_and_Tower_top_Kobra_2_Zip_Tie.STL | 869.0KB | |
| 03_Lower_wire_stack.STL | 329.3KB |
