<UPDATE June 22,2020>
I added two .f3d files made in a simple way on Autodesk Fusion 360.
<UPDATE October 27,2018>
I published Yet another knurling bolt and nut.
<UPDATE June 4,2018>
I uploaded Fusion360 (.f3d) files and step files.
<UPDATE May 21,2018>
An image of the tolerance between the nut and bolt was uploaded.
Only measured on 3dcad.
See at last thumbnail.
< SUMMARY >
There are knurling bolts and a nut that modeling on Autodesk Fusion 360.
I got a inspiration form Knurled surface finishing library by aubenc. Thanks!
I've prepared a bolt of various lengths.
So, print a bolt you want.
Bolts are M16, pitch 2.0, length 20, 30, 40, 50, 60mm, and Head OD 30mm, height 20mm.
A nut is M16, pitch 2.0, height 20mm.
See my YouTube about how to making a knurling on Fusion 360 Modeling a knurling on Autodesk Fusion 360
| knurling_bolt_01.f3d | 2.7MB | |
| knurling_bolt_01.step | 9.6MB | |
| knurling_bolt_100mm.stl | 2.1MB | |
| knurling_bolt_20mm.stl | 1.1MB | |
| knurling_bolt_30mm.stl | 1.0MB | |
| knurling_bolt_40mm.stl | 1.4MB | |
| knurling_bolt_50mm.stl | 1.4MB | |
| knurling_bolt_60mm.stl | 1.4MB | |
| knurling_bolt_80mm.stl | 2.1MB | |
| knurling_nut.stl | 1.2MB | |
| knurling_nut_01.f3d | 2.7MB | |
| knurling_nut_01.step | 9.5MB | |
| new_knurling_bolt_01.f3d | 1.3MB | |
| new_knurling_nut_01.f3d | 1.3MB |
