Knot A Vase 3D Printer Model
The file 'Knot A Vase 3D Printer Model' is (stl) file type, size is 63.2MB.
The file 'Knot A Vase 3D Printer Model' is (stl) file type, size is 63.2MB.
Despite what you might think, this is “Knot a Vase.”
See here for stable download: https://thangs.com/mythangs/file/28152
The lattice structures are between 1.8mm – 2.0mm in diameter, so stick with a small nozzle. The model above was printed using a 0.4mm nozzle.
The pre-supported file has custom supports for the steepest sections, but with a structure like this it is inevitable that you will get small areas of print fail within the lattice. Best to clean this up with a small file afterwards than try to support every overhang.
| Knot_a_Vase.stl | 57.7MB | |
| Knot_a_Vase_supports.stl | 60.0MB |
