Knobs, Knobs, Knobs 3D Printer Model
The file 'Knobs, Knobs, Knobs 3D Printer Model' is (stl) file type, size is 830.1KB.
The file 'Knobs, Knobs, Knobs 3D Printer Model' is (stl) file type, size is 830.1KB.
I needed a knob for a dado jig that I was building. It allows clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. the nut is pressed into the cavity. It should be tight as is but can be glued if needed. I used PETG for my knob. You can also use a hex head bolt instead of a nut on all four designs.
I also added a design for a larger knob that I made for my metal bandsaw tension control. It uses a 10mm hex head bolt.
Then I needed a knob for a 1/4" 20 bolt for another fixture so I modified the design for a 1/4" hex head bolt.
I added a 3/8 bolt knob too.
These four knobs can be scaled to fit whatever size bolt or nut you need. For example, I scaled the 10mm version down to work with the 5/16" bolt. I then changed the hole diameter. The 1/4" knob could be scaled smaller. The 3/8" knob can be scaled to 1/2" for example.
| 10mm_Bolt_Knob_V1.stl | 1.2MB | |
| Dado_Jig_Knob_0.3125_V2.stl | 264.9KB | |
| Knob_0.250_V2.stl | 350.3KB | |
| Knob_0.375_V1.stl | 268.7KB |
