Knobs For Radio(s) 3D Printer Model
The file 'Knobs For Radio(s) 3D Printer Model' is (gcode,3mf,stl) file type, size is 1.3MB.
The file 'Knobs For Radio(s) 3D Printer Model' is (gcode,3mf,stl) file type, size is 1.3MB.
Theses Radio Knobs are a resemblance of my HVAC Knobs for my JoyingAuto Radio. I love how my HVAC Knobs look and wanted the same for my radio instead of the existing Chrome Knobs. 3 different variations were made for different style choices. The Knobs do have a very snug fit on the Knob Shafts based on the dimensions of my Radio so they will not wiggle off, as well as a notch to prevent the knobs from spinning separate from the radio knob shafts. The notch is slightly raised from the bottom to have a more flush look.
Any suggestions? Please let me know in the comments!
| Radio-Knob-No-Bolts_20m53s.gcode | 1.4MB | |
| Radio-Knob-with_Bolt-Holes_22m29s.gcode | 1.5MB | |
| Radio-Knob-with_Bolts_23m29s.gcode | 1.6MB | |
| Radio_Knobs_Radio-Knob-No-Bolts.3mf | 45.4KB | |
| Radio_Knobs_Radio-Knob-with_Bolt-Holes.3mf | 87.7KB | |
| Radio_Knobs_Radio-Knob-with_Bolts.3mf | 91.0KB | |
| Radio_Knobs_STL_Radio-Knob-No-Bolts.stl | 157.8KB | |
| Radio_Knobs_STL_Radio-Knob-with_Bolt-Holes.stl | 322.6KB | |
| Radio_Knobs_STL_Radio-Knob-with_Bolts.stl | 329.1KB |
