Knitting Loom 3D Printer Model
The file 'Knitting Loom 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Knitting Loom 3D Printer Model' is (stl) file type, size is 1.3MB.
This is a 30cm knitting loom system I designed in Blender as a gift.
It will print in place as one solid piece. Have a look at my print settings if you want to avoid layer delamination at the base of the pins.
I designed the pins to be as strong as possible with the constraint that I wanted to print this loom as one solid piece.
There is a little groove in each pins (excepted for the 2 end pins) allowing you to slide in your knitting hook in it.
Also considering the size of this loom it might be tricky to print it on your printer. I have printed it on my Alfawise U30 and the bed size is 22*22 cm. I had to place my model in diagonal in order to be able to print it.
You'll need to have a perfectly flat bed if you try to print this model and might need a raft. Personnaly I used a custom one, just for the end pins, included in the model because the one generated in cura would exceed the build area of my printer.
| knittingLoom.stl | 2.2MB | |
| knittingLoom_raftEndPins.stl | 2.2MB |
