Made a Sharpening Tool on Request for a Whetstone Size 150x50x25 mm
Inital Size of 180 x 60 x 30 mm (L x W x H) you can find here :
https://www.thingiverse.com/thing:5390071
All parts are 3D-Print-Friendly.
No supports needed.
The Base is made of two identical parts wich are clipped into each other.
I made different Angle slides 15° 17,5° 20° and 22,5° wich should cover all the main household and pocket knifes.
The Base is made for an Whetstone 150 x 50 x 25 mm (L x W x H)
If this tool is useful for you please comment.
Don't hesitate to ask for any additions you need.
2020-06-22: Added 10 and 12° Carriage
| carriage-10_W50H25.stl | 4.0KB | |
| carriage-12_W50H25.stl | 4.8KB | |
| carriage-15_W50H25.stl | 5.0KB | |
| carriage-17-5_W50H25.stl | 6.9KB | |
| carriage-20_W50H25.stl | 5.7KB | |
| carriage-22-5_W50H25.stl | 9.7KB | |
| Endstop150x50.stl | 407.9KB | |
| Slides-150x50.stl | 3.1MB |
