This is my interpretation of the super structure of the great hall of the Klingons, used in Star Trek. It is scaled for the 5 inch Playmates action figures, but can be scaled up for larger figures.
This is just the structure of the hall, the columns, the roof supports and the trim rail that runs the length of roof. Do not mirror pieces, they have been made to be printed as is and flipped to be assembled. because the roof supports are so large I have split them for people with smaller printers.
I recommend using either plastic panels or carboard to cover the roof as you want. Also recommend using 3/4" square dowel for the supports at the rear that hold the Klingon logo. When fully assembled it will be quiet large I estimate the size as approximately.
15.5 inches tall
20 inches wide
and 25 inches deep
This is actually smaller than true scale, it is brought down to a playable reasonable size, if you want it as big as the show version, increase everything by 30%
The throne will only be available through my patreon for now.
Note: I’ve created a Patreon to support my modelling projects. If you’ve found my work useful, have the means, and would like to support my efforts, please give it a look. I will continue to release my designs for free on Thingiverse, but Patreon members will get early access and in progress updates on my new projects, and it will serve as a central location for announcements. Thanks for reading!
| column_A.stl | 57.5KB | |
| column_B.stl | 59.2KB | |
| Klingon_Logo_wall.stl | 79.6KB | |
| ridge_trim.stl | 16.6KB | |
| roof_structure_rib.stl | 20.9KB | |
| roof_structure_rib_half.stl | 12.8KB | |
| rostribhalfbtm.stl | 10.8KB | |
| rostribhalftop.stl | 15.3KB | |
| structure.stl | 845.9KB |
