Kitsune Fox Mask 3D Printer Model
The file 'Kitsune Fox Mask 3D Printer Model' is (stl,obj) file type, size is 167.0 MB.
The file 'Kitsune Fox Mask 3D Printer Model' is (stl,obj) file type, size is 167.0 MB.
A model of a fox mask that can be painted similar to Tanjiro's or Giyu's mask from Kimetsu no Yaiba
Tanjiro mask is the regular stl, Tanjiroflat has a flat bottom for easy printing/bed adhesion.
Tanjirocolour and Giyucolour are OBJ files with vertex colours.
I also included the Zylinder and Eye Rings files for people that want to print stuff for covering the eyes.
The eye rings are simple rings that you can print in black, adjust the z height to your liking and make sure your line width is compatible with the model. If you want to glue it to some mesh for the eyes Id recommend doing that while the rings are stuck to the build plate.
Example for the Cura-slicer:
If you also want to print the eye mesh you can use the Zylinder file. Print the eye rings with a low z height like 0.2mm and keep them stuck to the build plate. Place the Zylinder file on the same spot on the buildplate in Cura and slice it with the Raft build plate adhesion setting and set Raft Extra Margin to 0. Swap in some red filament and print the mesh over the already printed eye rings. Abort the print after the second layer has been printed and youll get a neat multi color eyemesh. Make sure to experiment with Raft Base and Raft Middle settings to get a mesh that is comfortable to look through. I used 1mm width, 2mm spacing and 0.48mm thickness for the one in the picture.
| Eye_Rings.stl |
| Giyucolour.obj |
| Tanjirocolour.obj |
| Tanjiroflat.stl |
| Tanjiro_mask.stl |
| zylinder.stl |
