This is a shield for a KitchenAid mixer with a bowl of 220mm in diameter.
The funnel is cliped on the shield with four little hooks. I don´t know how reliable these hooks are if you often take it appart because they are only 0.5mm high. On my shield the funnel is always attached.
You can put it on a closed maschine without removing the mixing attachment.
I used PLA. Its not the best choice because its in contact with food and i don´t think you can put it in the dishwasher. Use what you think works best.
You´ll need a support for the edge of the buttom of funnel and i used a brim with 12mm because of the wide overhang. You don´t need any support for the shield.
The shield is 230mm in diameter so only for bigger printers.
| KitchenAid_funnel_v7.stl | 848.0KB | |
| KitchenAid_shield_v5.stl | 455.2KB |
