I have a Kitchenaid French-door Fridge and freezer. Model #KRMF706ESS01

The freezer has 2 pullout drawers above the main one. The uppermost drawer rides on a set of linear rails with part numbers: PS8759994 and PS17215973 because they're not universal (side-specific). These are designed to "clip" into place on the upper drawer assembly (they call it a "Freezer Bin") which is part PS12728679.

Unfortunately, the plastic clips on this freezer bin are absolute crap and break off very easily especially once the freezer is cold and the plastic becomes more brittle.

Rather than spending $200 to replace the entire drawer assembly, I opted to sketch up and print these little retaining clips.

Posting this up (with all the SEO part numbers and model numbers) mostly in the hopes that if someone else finds themselves in this position, you can just print these out and save yourself $200

It probably will work with any Whirlpool, Amana, Kitchenaid, etc freezer that uses a slide-rail based drawer. You might have to tweak some of the sizes to fit your freezer.

Installation: Clip to the end of the metal on the linear rail once the drawer is correctly clipped in place. It will block the rail from being able to slide loose by accident.

Find the original design file at OnShape: https://cad.onshape.com/documents/b71c46bf9416b3d8d28a282e/w/a2652ab58f0bd7ede99e6807/e/7b1a1fa9eeb93d8f11407c12?renderMode=0&uiState=66c27db5633b6f371233743f