These hangars are mounted using #4 wood screws or similar. You can just use what you have laying around. The mounts should snap into the spacing tool, which you can then line up along a straight edge for easy mounting. I used a few pieces of tape to stick the spacing tool to the top of my cabinet so I could mark and drill small pilot holes and screw the mounts in. Once you have two in, just move spacing tool over and snap it on the one side, then snap on the next mount and it should be all lined up.
The spacing tool locks on so that the mounts all face the same direction. Any Kitchenaid attachment should lock right onto it. I used tree supports for easy removal. Happy Hanging!
| Kitchenaid_Attachment_Mount.STL | 376.1KB | |
| Kitchenaid_Mount_Spacer.STL | 48.3KB |
