This is a Sink Organizer for the kitchen.
The goal was to make a robust model, with a open bottom to allow for water to flow. The Hexagon shape for the holes was a easy design choice :)
Updated 13/01/2023: Added a side top area.
Updated 2: 16/01/2023: Added to parts to make a small hanger to dry the dish cloth. A Hexagonal Peg and a small rod. I didn't need glue to attach the pegs and the rod.
Printing instructions:
Material: PLA or PTEG (or similar…)
Layer Height: .2
Infill: 15%
Walls: 3 for extra strenght
Supports: Yes
Change filament during print: Not needed
Brim: Recommended
Raft: No
All models are print ready oriented.
Assembly:
Just slide the side in the bucket. Some force may be needed. No glue is required.
And that's it! I hope it fits your needs!
Ps: If you like this model and want to support me in a simple way, like, download and share this model with your friends. If you make one I would love to see yours, please share your make.
| Corpo.stl | 454.6KB | |
| Lateral.stl | 80.9KB | |
| Peg.stl | 4.2KB | |
| Rod.stl | 47.9KB | |
| Topside.stl | 97.3KB |
