Hi!

This is a Kinetic Sculpture using the design of a car (KONA, HYUNDAI MOTORS) wheel.

The simple and fancy wing consist of straight line are thought to be suitable for the modern interior.

How to make video here : https://youtu.be/AdXlnZvtwAs

If you like this project, plz push Subscribe and Like button to support my next :)

/List of Revision
[1] 26.10.2021
// What : Add drawing files 'front_subRing_v1' and 'pawl_forRear'
// Why : To improve running stop error.
// Method : Use 'front_subRing_v1' instead 'front_subRing'. Use 'pawl_forRear' for rear wing assay.

[2] 29.10.2021
// What : Add drawing files 'gap_22mm'
// Why : To improve running stop error.
// Method : Use ''gap_22mm' instead ''gap_20mm'.

/Parts list
[1] 3D printed parts

• controlGear (1 ea)
• springGuide (1 ea)
• frontWing (5 ea)
• frontWing_center (1 ea)
• front_subRing (1)
• rearWing (5 ea)
• rearWing_center (1 ea)
• rearWing_block (1 ea)
• rearPawl_base (1 ea)
• outerRing (10 ea)
• pawl (2 ea)
• gap_9mm (1 ea)
• gap_15mm (1 ea)
• gap_20mm (1 ea)
• front_subRing_v1 (1 ea, Revision [1])
• pawl_forRear (1 ea, Revision [1])
• gap_22mm (1 ea, Revision [2])

[2] Non 3D printed parts
(Length of bolt includes head.)

• Constant force spring (1 EA, 0.4 kg, 1000 mm, MISUMI Co.)
  --> Link: https://focusing-korea.myshopify.com/products/misumi-static-load-constant-force-spring-0-4kgf-1000mm

• Ball bearing (4 EA, OD: 22 mm, ID: 8 mm, width 7 mm)
• Ball bearing (2 EA, OD: 10 mm, ID: 5 mm, width 4 mm)
• Stainless rod (1 EA, Ø8 mm, length 115 mm)
• Stainless rod(1 EA, Ø8 mm, length 45 mm)
• Copper rod for weight (case by case, Ø12 mm, height 10 mm)
• Nb magnet (3 EA, Ø6 mm, height 3 mm)
• Nb magnet (8 EA, Ø8 mm, height 3 mm)
• M3 bolt (5 EA, length 19 mm, round head)
• M3 bolt (5 EA, length 15 mm, round head)
• M3 bolt (2 EA, length 11 mm, round head)
• M5 bolt (3 EA, length 13 mm, round head)
• M3 nut (5 EA)
• M5 washer (1 EA)
• Pillar used to install (IKEA, Product number: ELVARLI, No. 202.961.71)