I designed this bow for my son. It's an easy to print bow. The strength of the bow is determined by what material and infill you use. I used PET-G for the limbs, but I'll try CPE later, as that will have a better flex/spring I believe. Print two of the limbs, no need to rotate or mirror.
The riser/handle needs to be printed in a stiff material.
Fits on the print bed of a regular Prusa i3.
Uses regular M6 nuts and bolts to assemble.
| grip-v3-no-text.stl | 220.3KB | |
| limb-2x.stl | 63.8KB |
