Kickstand / Sidestand Plate (for Bigger Bikes) 3D Printer Model
The file 'Kickstand / Sidestand Plate (for Bigger Bikes) 3D Printer Model' is (stl) file type, size is 288.1KB.
The file 'Kickstand / Sidestand Plate (for Bigger Bikes) 3D Printer Model' is (stl) file type, size is 288.1KB.
UPDATE: V2 - After breaking one after leaning on my Ducati while in the stand (the Ducati leans over a bit more than most other bikes, hence greater apparent weight) I redesigned the plate to have a thicker base. To compensate the extra height I reduced the top lip by the same amount.
A modified sidestand plate from https://www.thingiverse.com/thing:2888654 which was a little too small for the larger foot on my 2014 CBR1000RR's sidestand.
This has been scaled 25% in the 'X', and 10% in the 'Y'.
I printed one in PETG and one in PLA with 20% infill. I would recommend PETG or ABS if it is going to be used outside for any length of time, and maybe 40-50% infill especially if you have a bike that's 200+Kg (450+ lbs).
I also removed the previous person's name from the plate, as they didn't design it, and if you want to name yours you could just use a marker pen if you want :)
| stand-plate-V2.stl | 471.9KB | |
| stand-plate1.stl | 459.6KB |
