I designed these in Inkscape to be used with the card game KeyForge. They are set up to be cut from a 200x300 piece of MDF. I found 2 mm to be best. Black is the engraving and red is the cut line as used by K40 whisperer. The files contain two sets of tokens and are in svg format to avoid issues between metric and imperial.
To cut, you should, first tape down your material to the cutter bed. Then engrave side 1, followed by cutting side 1. Leave the material in place as a template and flip all token groups right to left except stun and taunt (teardrop shape) which are flipped top to bottom. You should then engrave before finally cutting out the individual tokens.
When I cut them, I first cover the wood in masking tape to allow painting of the engraved areas and reduce smoke sublimation damage. Don't forget to cover both sides.
Tokens included
24 Plus armour/ broken armour (double-sided)
24 Plus 1 Power
21 1 damage/ 3 damage (double-sided)
12 Stun tokens
6 Doom
9 Ward
8 Taunt
9 Enrage
| Cut_-_armour_side_1.svg | 480.6KB | |
| Cut_-_armour_side_2.svg | 636.2KB |
