Keyblade Wall Mount 3D Printer Model
The file 'Keyblade Wall Mount 3D Printer Model' is (stl,zip) file type, size is 4.0MB.
The file 'Keyblade Wall Mount 3D Printer Model' is (stl,zip) file type, size is 4.0MB.
Display the original Keyblade from Kingdom Hearts. Uses double sided wall hanging tape to create a mount that openly displays the Keyblade while allowing you to just take the Keyblade right off when you want to play around with it or show it to people. It has the Kingdom Hearts logo on top.
The mount can be easily removed by inserting a screwdriver into the keyhole, breaking the failure points, and pulling on the adhesive removal tab. I have used it for a while now and it works great. I have also tested removing it from the wall. Do not use if you have weak or bubbling paint or weak drywall.
I used PLA, which should not break under weight as long as you have your print setting right and have good filament. Printed with 0.4mm nozzle. PLA and 0.4mm nozzle are recommended for the keyhole release to work properly.
See Details.txt in ZIP file for instructions.
| KeybladeMount.stl | 693.1KB | |
| Keyblade_Wall_Mount.zip | 3.7MB |
