Key Holder/Quarter Holder 3D Printer Model Free Download

Description Files (7)

Summary

This is a pretty simple key holder with a bonus quarter holder so you always have a quarter for Aldi. I made most of it in Fusion 360 and have provided the STEP files. I printed everything in PLA at 100% fill and the holder is plenty strong.

You need to print two of the key holders. You can print two smooth, two textured, or one of each, they are reversible. I recommend one of each so that you can easily identify which way you are holding.

It uses 3/8" aluminum screws posts to hold the keys in place. You could use shorter or longer posts depending on your needs. If you don't change your keys regularly, I'd recommend using blue loctite on the threads so the holder doesn't come apart in your pocket.

The spacers are primarily for making sure there's enough room for the quarter holder to slide between the opposite keys. It is nice to be able to shim both stacks so they are same thickness though. I've only included 1mm thick spacers, because I didn't the want the openSCAD model to create a customizer. If you need different thicknesses of spacer just change the Z scaling when you print.

Here are two sources for the posts:
https://www.menards.com/main/tools-hardware/fasteners-fastener-accessories/bolts/binding-posts-binding-post-extensions/3-8-screw-post-with-screw-1-pcs/p-1444440136664-c-19382.htm?tid=1045762145736923831&ipos=4

https://www.amazon.com/Aluminum-Chicago-Screws-Screw-Posts/dp/B003O5GXMM

Key_Holder.step	43.4KB
Key_Holder.stl	2.0MB
Key_Holder_Textured.stl	3.2MB
Key_Spacer_1mm.stl	131.8KB
Quarter_Holder.step	71.7KB
Quarter_Holder.stl	2.1MB
Textured_Key_Holder.step	3.0MB

Key Holder/Quarter Holder 3D Printer Model

Summary

Tags

You might also like