Key Holder With Moving Characters 3D Printer Model Free Download

Description Files (21)

Summary

Printing the parts

All parts of the box can be printed without support. Just place them with the correct side on the printing bed.

Schluessel_1: This is the back of the box.
Schluessel_3: Separator between the two sliding frames with the characters
Schluessel_4: Front cover of the box. Letters and Hippie-Heart have different heights. In the slicer you have to set a filament-change just before the letters. Then set a second filament change before the heart. If available use the “ironing”-option for all top layers.
Schluessel_2a: This is the frame of the female sheep. Print it in white color - you need to paint it with acryl color after printing it.
Schluessel_2b: The male sheep. The frame needs to be printed in white, too.
Schluessel_2: If you don't like the two sheeps you can use this frame and add your own characters.
Schluessel_5: I used two small magnets to attach the keys. This is a small sleeve for it. Also the thread is fixed with it. As alternative solution you can use something different, e. g. a small hook.
Schluessel_6: To attach the box to the wall you can use this part. Print it two times. Attention: One needs to be mirrored in the slicer!

A detailed description can be found here

Schluessel_1.FCStd	447.2KB
Schluessel_1.stl	1001.9KB
Schluessel_1_0.2mm_PLA_MINI_1h46m.gcode	2.1MB
Schluessel_2.FCStd	39.3KB
Schluessel_2a.FCStd	4.6MB
Schluessel_2a.stl	12.8MB
Schluessel_2a_0.2mm_PLA_MINI_57m.gcode	1.6MB
Schluessel_2b.FCStd	5.8MB
Schluessel_2b.stl	16.5MB
Schluessel_2b_0.2mm_PLA_MINI_1h38m.gcode	1.7MB
Schluessel_3.FCStd	710.2KB
Schluessel_3.stl	1.9MB
Schluessel_3_0.2mm_PLA_MINI_1h41m.gcode	2.1MB
Schluessel_4.FCStd	18.2MB
Schluessel_4.stl	32.8MB
Schluessel_4_0.2mm_PLA_MINI_5h19m.gcode	1.8MB
Schluessel_5.FCStd	92.1KB
Schluessel_5.stl	246.3KB
Schluessel_5_0.2mm_PLA_MINI_6m.gcode	395.6KB
Schluessel_6.FCStd	482.0KB
Schluessel_6.stl	1.3MB