Key Holder SW Knife Style 3D Printer Model
The file 'Key Holder SW Knife Style 3D Printer Model' is (stl) file type, size is 185.6KB.
The file 'Key Holder SW Knife Style 3D Printer Model' is (stl) file type, size is 185.6KB.
I printed this on a CR-10S using PLA.
Printed at .12mm resolution and 25% infill for resiliency.
This object requires no supports and prints in about an hour.
Use 6/32 Oval or Flat Phillips Machine screws at the length required to hold the number of keys your have. I have only tested up to 24 keys using a 2" screw. Use a dremel or similar tool to cut the screw to length if desired.
Use matching #6/32 nylock nuts to prevent the screws from backing out due to use.
Optional: Place appropriately sized washers between keys and plastic to prevent wear on the plastic.
| KL_blank.stl | 224.6KB | |
| KR_blank.stl | 340.0KB |
