Key Holder 3D Printer Model
The file 'Key Holder 3D Printer Model' is (stl) file type, size is 675.40 KB.
The file 'Key Holder 3D Printer Model' is (stl) file type, size is 675.40 KB.
Hi all,
Just a simple multilevel Hexagonal Key tidy.
There are 3 heights of key fob to match the varying heights of the holder. Below are the quantities of each you would need to print to fill the holder but I think it looks better if you leave some gaps
x4 - 15
x11 - 20
x4 - 25
Depending on your printer you may need to scale the print to fit on your bed.
Technically there should be a 0.1mm gap between the fob and the holder but I had a slight issue with the squish effecting the fit of the fobs into the holder so I scaled the fobs slightly more than the holder.
I scaled to;
Holder = 70%
Fobs = 68.5%
Just because I preferred the smaller fob size for the keyrings.
Update:
I have added a v2 holder to fit the 15mm key fobs. That way you can print all 15's.
I have also added a v2 with holes as i know someone mentioned mounting it on a wall.
Cheers
| 15.stl |
| 20.stl |
| 25.stl |
| Design2v2.stl |
| Design2v2_-_with_holes.stl |
| Holder.stl |
