•?((¯°·..• CLOUD KEY HANGER •..·°¯))؟•
Very cool Keyholder for hanging keys on the wall!
Insturction:
For the Assembly you need 4 Magnets, i used 4 Neodym Magnets N52 (20mm x 3mm).
Glue with Hotglue or Glue that works with PLA. Also other powerful Magnets should work fine.
For the construction you need 4 Screws (2), 2 to screw on the wall(double sided tape works too!) and 2 for the Front Part.
Small Screw 16mm should work fine, also a little bigger ones work too. (Both M3)
NOW NEW:
Easy to print Cover! Print with 0% Infill and just put it on!
++++
Fast Printtime!
Post your pictures! :)
| enclosure.stl | 55.6KB | |
| KeyCloud_Cloud.stl | 49.4KB | |
| KeyCloud_Complete.stl | 125.2KB | |
| KeyCloud_Holder.stl | 75.8KB |
