Stand for the Kemper Profiling Amp "toaster" guitar/bass amplifier.
This stand tilts the amplifier up or down 12 degrees, giving more flexibility in placement.
Tilt down for shelf above your eye line.
Use at your own risk! If you yank the KPA by a cable, it will still come tumbling down :)
Laser cut the DXF out of 1/4 plywood(you will need to offset for your laser kerf), or print on a very large printer
| kemper_mount.dxf | 390.4KB | |
| kpa_holder_assemby.stl | 113.2KB |
