I wanted to attach a drip tray to my kegerator so I made some custom brackets for it. Some notes on my particular use case and where you might need to tweak things a bit:
-I wanted the side brackets to go through some outer frame boards which is why they are slightly wider than the two trays themselves. Depending on your set-up these could be brought flush with the tray or offset in the other direction.
-The very center bracket is 1.75x the width of the other two center brackets to give a bit more room for two trays to sit snuggly on it. The other two brackets were command stripped on, but I found that it wasn't very secure, so I added screw holes to the larger center one. Happy to upload a version without the screw holes if desired.
Additional parts:
| CenterBracket.stl | 19.2KB | |
| CenterBracket_x1.75.stl | 19.2KB | |
| LeftBracket.stl | 20.1KB | |
| RightBracket.stl | 20.1KB |
![Beer Yeast Separation Funnel Using Erlenmeyer [Customizable] 3D Printer Model](https://cdn.3axis.co/assets/26/28/ba/bf/2628babf-5264-48d4-a6a6-bf2f7a68f55c/images/534046e7-64a7-4d78-bc31-d2a1fd092da0_thumb.jpg)
