Kegerator Brackets, Mounts And Hinges 3D Printer Model
The file 'Kegerator Brackets, Mounts And Hinges 3D Printer Model' is (stl) file type, size is 682.6KB.
The file 'Kegerator Brackets, Mounts And Hinges 3D Printer Model' is (stl) file type, size is 682.6KB.
These are the files for the brackets, mounts and hinges I used on my kegerator.
Stand-off gas inlet and thread block passthrough both use standard PET bottle thread patterns.
Use supports as suggested by your slicer.
Certain parts printed at .16mm layer height for aesthetics but most at .20mm
Infill between 25-35% for most, with lots of walls (6-8). Hinges 50% infill.
| 4_way_gas_manifold_-_flat_mount.stl | 59.5KB | |
| Dual_8mm_gas_inlet.stl | 1.1MB | |
| Duotight_Elbow_Bracket.stl | 25.8KB | |
| Gauge_Guard.stl | 226.8KB | |
| Gauge_Guard_LHS.stl | 68.9KB | |
| Gauge_Guard_RHS.stl | 134.8KB | |
| Hinge_Base_-_Holes.stl | 112.1KB | |
| Hinge_Top_-_Holes.stl | 90.8KB | |
| Hose_clamps.stl | 44.5KB | |
| Hose_clamps_-_No_mount.stl | 27.0KB | |
| Stand-off_gas_inlet.stl | 282.7KB | |
| Thread_block_-_Passthrough.stl | 154.5KB |
