These are the missing parts that I needed to build the drone
The GPS and camera mount is made of TPU
The pipes for this are made of PLA
These mounts are put on the pipes
For the whole frame you need 4 pipes of 29mm and 6 of 19mm if you use M3 8x35mm and 2x25mm
Snow proof was also made, because my drone is not protected from water. This part is printed of TPU, and does not give 100% protection against water, rather only against snow flakes
The holes in snow proof are made for easier screwing of bolts and access to USB, they should be taped
Components of my drone:
Motors - SURPASS HOBBY B2806.5 1300KV
Stack - HGLRC SPECTER F460
GPS - HGLRC M80 PRO
VTX - HGLRC Zeus VTX PRO 1.6W
Analog Camera - CADDXFPV Ratel Pro 1500TV
RX - HappyModel ExpressLRS ELRS 2,4G
Propellers - HQPROP HQ 7X4X3 7040
| analog_camera_mount_for_KDrone.stl | 381.3KB | |
| arm_bumper_for_KDrone.stl | 592.1KB | |
| gps_mount_for_KDrone.stl | 202.1KB | |
| pipe_19mm.stl | 309.7KB | |
| pipe_29mm.stl | 304.5KB | |
| TEST_hotswap_gopro_mount_for_KDrone.stl | 170.8KB | |
| TEST_KDrone_snow_proof.stl | 218.3KB |
