Kbricks Forklift 3D Printer Model
The file 'Kbricks Forklift 3D Printer Model' is (stl) file type, size is 4.3MB.
The file 'Kbricks Forklift 3D Printer Model' is (stl) file type, size is 4.3MB.
The kbricks forklift uses a subset of 32 parts of the kbricks construction system and is one of the first models I designed for it. The forklift has a functioning steering, the forklift unit can be tilted, and the fork can be moved up and down. All parts are printed except for the tires which are cut from an old bicycle tube.
The list below shows how often each part needs to be printed. A video provides a step-by-step description for assembling the model.
| axle4.stl | 2.9MB | |
| axle6.stl | 3.1MB | |
| axle8.stl | 3.4MB | |
| axle_ring.stl | 166.3KB | |
| beam12.stl | 2.4MB | |
| beam3_peg_pos1.stl | 2.4MB | |
| beam3_rounded_flat.stl | 538.7KB | |
| beam4_rounded_flat.stl | 538.9KB | |
| beam7_alternating.stl | 1.4MB | |
| bevel_gear_90deg.stl | 1.7MB | |
| bevel_gear_90deg_short.stl | 1.4MB | |
| connector_long.stl | 148.6KB | |
| connector_short.stl | 148.6KB | |
| cube_1hole_open.stl | 843.8KB | |
| cube_2hole.stl | 981.1KB | |
| cube_basic.stl | 936.7KB | |
| cube_smooth.stl | 630.6KB | |
| gear1.stl | 334.8KB | |
| gear_rack12.stl | 644.2KB | |
| gear_rack6.stl | 583.6KB | |
| peg.stl | 3.5MB | |
| plate2x1.stl | 317.9KB | |
| plate2x1_rounded.stl | 345.5KB | |
| plate4x1.stl | 631.8KB | |
| plate_1hole.stl | 361.6KB | |
| plate_2hole.stl | 560.7KB | |
| plate_2hole_inline.stl | 498.0KB | |
| plate_2hole_rounded_inline_centered.stl | 534.9KB | |
| prism_45deg.stl | 410.7KB | |
| spoke_wheel2_locked.stl | 3.9MB | |
| spoke_wheel3_rim.stl | 4.1MB | |
| steering6.stl | 1.1MB |
