Track-mounted cup holder for kayaks. Printed with PLA. Fits plastic bottles and cans perfectly. It can use a 1/4-20 bolt or a yak attack bolt to attach to your kayak. All part links may not be the best place to get the parts, Many can be found at your local hardware store.
Post Processing:
The 3 brass inserts should be set into the plastic base with a soldering iron. Then it's a matter of assembling the rest. The spacer goes in the hole after the washer and gets sandwiched between the washer and the cup.
Parts Needed:
3 4x6x6 Brass Inserts https://www.mcmaster.com/94459A160/
3 4X6 Flat Head Screws https://www.mcmaster.com/92010A216/
1 1/4-20 Nut https://www.mcmaster.com/95462A029/
1 1/4-20 x 1in Bolt (For Unitrack mount) https://www.mcmaster.com/91268A503/
or
1 1/4-20 x 1in T-bolt https://www.amazon.com/dp/B01FZYE15K?ref_=cm_sw_r_cp_ud_dp_VM3TAZ9KH4YKCJNY53CX
| Base.STL | 366.0KB | |
| Cup.STL | 447.1KB | |
| Spacer.STL | 19.2KB | |
| Unitrack.STL | 10.4KB |
