I designed a simple mod for the stock Kawasaki versys x300 windshield. This mod has significantly lessened the buffeting on my motorcycle helmet, though it still isn't perfect. I am 6'2" and I wear a Bell MX9. The spacers are 25mm long (about 1").
You will need some hardware:
4 - Stainless 40xM6 bolts
4 - Stainless 5/16 metal washers
8 - 5/16x3/4x1/16 rubber washers
You can use regular non stainless bolts, but they will rust over time.
I have also added a simlpe, yet terrible drawing for installation. I also used lock tight on the bolts, just to be safe.
All parts were printed with PETG. Use at your own risk.
| 25mm_cut_out.stl | 87.1KB | |
| 2mm_washer.stl | 31.9KB |
